Skip to content
Save 24% now! Christmas campaign - Code: XMAS
Save 24% now! Code: XMAS

XADO flushing oil engine / transmission flushing engine flushing

SKU XB 20250_2
Availability:
Out of stock
Sold out
Original price €13,49 - Original price €13,49
Original price
€13,49
€13,49 - €13,49
Current price €13,49
2000.0ml | €0,67 / 100ml

09:00 – 15:30

Bitte warten Sie auf unsere Email, dass Ihre Bestellung bereit zur Abholung ist.

Produktbeschreibung

XADO flushing oil engine / transmission flushing engine flushing

Low-viscosity flushing oil / mineral oil with a special additive package for flushing engines and gears. Contains REVITALIZANT®.

This product is for cleaning intended for flushing the oil systems of engines and transmissions and is usually used after using an engine cleaner (e.g. XADO Total Flush or Vita Flush).

Special flushing, dispersing, wear-inhibiting additives and EP additives* allow reliable engine flushing / transmission flushing in 30-40 minutes.

While the engine cleaner (XADO Total Flush / Vita Flush) cleans the oil system beforehand, this flushing oil only flushes the empty oil system completely once and removes the deposits loosened by the cleaner when the flushing oil is drained.

This flush is not an engine cleaner but collects and removes all dirt and deposits from the oil system.

  • The flushing oil allows safe flushing of the oil system for engine and transmission
  • Wear protection reserve (revitalization technology)
  • Intensive rinsing of heavily soiled units in 30-40 minutes thanks to the effect of the EP additive* package
  • Restoring the mobility of the oil scraper and compression rings
  • Prevents the hydraulic compensators from sticking

 


Detailed specifications

use

Technical specifications:

  • Density at 20 °C, kg/l - 0.885
  • Viscosity at 40 °C, mm2/s - 30.0
  • Viscosity Index - >100
  • Flash point, °C – 210
  • Stockpunkt, °C - <-15
  • Alkali number, mgKOH/g - 30.0

notes

For engines:

  1. Drain off the warm used oil
  2. Fill in flushing oil up to the minimum mark on the oil dipstick
  3. Start the engine and let it run for 10-15 minutes (if the engine is very dirty — up to 30-40 minutes). NOT DRIVING
  4. Stop the engine, drain the flushing oil, change the oil filter
  5. Fill in engine oil.

For gears:

  1. Drain off the warm used oil
  2. Pour flushing oil into the gearbox up to the specified value
  3. Let the gearbox run without load (on a lifting platform with free-wheeling tires) for 10-15 minutes (if heavily soiled — up to 30-40 minutes). NOT DRIVING
  4. Stop the engine and drain the flushing oil
  5. Fill in gear oil

Notice:

Caution! Do not drive with the flushing oil!

packaging

PET bag 2 L, type 202В 20250_2

Find products by problem solving