Skip to content
XADO engine - anti-wear oil additive Twin Turbo

XADO engine - anti-wear oil additive Twin Turbo

SKU XA 40028
Availability:
in stock, ready to be shipped
€119,90 - €119,90
€119,90
€119,90 - €119,90
€119,90
0.36l | €333,06 / l

09:00 – 15:30

Bitte warten Sie auf unsere Email, dass Ihre Bestellung bereit zur Abholung ist.

Produktbeschreibung

XADO engine - wear protection - atomic metal conditioner Twin Turbo - for high-performance engines with 3-10L oil volume

Engine wear protection additive that has a metal-ceramic coating


Due to the daily operation of an engine, the passage of time becomes signs of wear over time,

For example on the metal surfaces in the cylinder.


XADO offers a remedy in the form of an intelligent oil additive package. 

It enables a restoration of the surfaces that build up a metal-ceramic layer.

This is formed at the points where high pressure and temperatures occur due to friction.


The metal-ceramic coating formed by Revitalizant protects the engine parts even after the oil change.

 

The additive package at a glance:

revitalized 

Restores worn surfaces by forming a metal-ceramic layer in areas in the engine where friction causes high pressure and temperatures.

2D GLEITAGENT

Reduces friction losses to an absolute minimum.

METAL CONDITIONS

Protects the engine against the breakage of the oil film and thus prevents additional wear.


Benefits of revitalizing with 1 stage maximum:

  • Restores the surfaces of engine parts and compensates for wear and tear.
  • Engine compression recovery.
  • Forms active protection against overload and overheating.
  • Improves the lubricating properties of engine oil and the tribological parameters of engine parts.
  • Does the fuel & Oil consumption
  • Increase engine performance and improve driving dynamics.

 

Oil consumption with this product:

  • Oil scraper rings of the pistons are worn
  • Worn cylinder surfaces

Innovative 3-component* product of the latest nano generation.

Combines the advantages of the two-phase metal conditioner with the Revitalizantes.

The advantage of metal conditioner with Revitalizant is the after-effect: the metal-ceramic coating formed by Revitalizant peels the engine parts even after the oil change.


Detailed specifications

use

  1. shake the can
  2. Have the content in the oil filler opening of the engine
  3. Start the engine and let it idle for 3-5 minutes. Use the vehicle cheaply or badly

* At minus degrees it is recommended to increase the agent to room temperature.

Caution! Not intended for use in internal combustion engines with a special hardening coating on the cylinders (ALUSIL, LOKASIL, NIKASIL, GALNIKAL) because the material required to form a stable metal-ceramic layer is missing.

notes

  • Oil additive that reduces oil consumption
  • Motor works better (more smooth running)
  • Restoration of engine compression
  • Suitable for all petrol / LPG / diesel engines

Oil consumption with this product:

  • Oil scraper rings of the pistons are worn
  • Worn cylinder surfaces

This oil additive is an innovative 3-component* product of the latest nano generation.

Combines the advantages of the two-phase metal conditioner with the Revitalizantes.

The advantage of metal conditioner with Revitalizant is the after-effect: the metal-ceramic coating formed by Revitalizant peels the engine parts even after the oil change.

Able to heal friction surface damage up to 0.2 mm deep thanks to the use of the latest complex adaptive REVITALIZANT (KAR) technology. Thanks to the KAR, the product allows for the first time not only restoration and wear protection, but also the extended level of surface regeneration properties. RF=100 Plus; RF (Revitalization® factor) is a value related to the efficiency of engine restoration and anti-wear; RF=100 Plus means that the engine has completed the entire revitalization cycle. It is fully restored, protected from wear and allows the reserve of the regenerative properties of the coating* for the next 100,000 km of mileage.

*Should a crack appear on the friction surface during the following 100,000 km (e.g. due to a hard grain of sand), this will be completely eliminated by the special properties and the compressive stress reserve in the surface layer of the metal-ceramic coating.

Use:

The solution in the bottle to min. Heat +25°С. Shake the bottle, pour the solution into the oil filler hole of the engine warmed up to operating temperature. Start the engine and let it idle for 3-5 minutes.

Drive the car in normal operation.

Hints:

Developed specifically for car engines. Also used for small trucks, minibuses and engines with a volume of 3-10 L.

Compatible with all engine oil types.

  • The revitalization takes place over a period of 1,000 - 1,200 km. Please do not change the oil during this period.
  • Repeated use of AMC Maximum Twin Turbo is recommended after 100,000 km.
  • The product contains REVITALIZANT® particles that dissolve in engine oil at operating temperature.

Dosage:

1 bottle (360 ml) for engines with an oil system volume of 3-10 L. The oil level should not be higher than the maximum mark on the oil dipstick.

Please do not overdose.

Technology and Certificates

3G Plus Generation

 

4C Effect

 

packaging

Bottle in a cardboard box 360 ml, CA 40028

    Find products by problem solving