Skip to content

XADO Flushing Oil - Engine Flush - Engine & Transmission Flushing with Revitalizant

SKU XA 20195
Availability:
in stock, ready to be shipped
Original price €13,99 - Original price €13,99
Original price
€13,99
€13,99 - €13,99
Current price €13,99
1000.0ml | €13,99 / l

09:00 – 15:30

Bitte warten Sie auf unsere Email, dass Ihre Bestellung bereit zur Abholung ist.

Produktbeschreibung

Low-viscosity flushing oil / mineral oil with a special additive package for flushing engines and gears. Contains REVITALIZANT®.

This mineral oil with an additive complex is used to clean and flush oil systems in engines and manual transmissions. It is usually used after using an engine cleaner (e.g. XADO Total Flush or Vita Flush).

Special rinsing, dispersing, wear-inhibiting additives, such as Revitalizant, allow reliable engine rinsing / transmission rinsing in 30-40 minutes.

While the engine cleaner (XADO Total Flush / Vita Flush) cleans the oil system beforehand, this flushing oil also flushes the empty oil system once completely and removes the deposits loosened by the cleaner when the flushing oil is drained.

This flush collects and removes all dirt and deposits from the oil system, especially after a previous cleaning with a cleaner (Total Flush, Vita Flush).

  • The flushing oil allows safe flushing of the oil system for engine and transmission
  • Wear protection reserve (revitalization technology)
  • Intensive rinsing of heavily soiled aggregates in 30-40 minutes
  • Restoring the mobility of the oil scraper and compression rings
  • Prevents the hydraulic compensators from sticking

 


Detaillierte Spezifikationen

use

Technical specifications:

  • Density at 20 °C, kg/l - 0.885
  • Viscosity at 40 °C, mm2/s - 30.0
  • Viscosity Index - >100
  • Flash point, °C +210
  • pour point, °C - <-15
  • Alkali number, mgKOH/g - 30.0

notes

For engines:

  1. Drain off the warm used oil
  2. Fill in flushing oil up to the minimum mark on the oil dipstick
  3. Start the engine and let it run for 10-15 minutes (if the engine is very dirty — up to 30-40 minutes). NOT DRIVING
  4. Stop the engine, drain the flushing oil, change the oil filter
  5. Fill in engine oil.

For gears:

  1. Drain off the warm used oil
  2. Pour flushing oil into the gearbox up to the specified value
  3. Let the gearbox run without load (on a lifting platform with free-wheeling tires) for 10-15 minutes (if heavily soiled — up to 30-40 minutes). NOT DRIVING
  4. Stop the engine and drain the flushing oil
  5. Fill in gear oil

Notice:

Caution! Do not drive with the flushing oil!

packaging

Dose, 1 Liter
Article number: XA 20195

    Find products by problem solving