Skip to content

XADO engine - anti-wear oil additive - AMC Maximum

SKU XA 40212
Availability:
in stock, ready to be shipped
Original price €49,90 - Original price €49,90
Original price
€49,90
€49,90 - €49,90
Current price €49,90
225.0ml | €22,18 / 100ml

09:00 – 15:30

Bitte warten Sie auf unsere Email, dass Ihre Bestellung bereit zur Abholung ist.

Produktbeschreibung

Everyday operation of an engine inevitably leads to signs of wear over time, for example on the metal surfaces in the cylinder.

The result is loss of compression and increased oil consumption.


XADO offers a remedy in the form of an intelligent oil additive package.

It enables worn metal surfaces to be restored by building up a metal-ceramic layer.

This is formed at the points where high pressure and temperatures occur due to friction.

The compression in the engine is thus brought back to the target values and the oil consumption due to the burning of the oil also decreases again.

The formation of the metal-ceramic layer works by creating a new surface connection between the additive atoms and the metal atoms on the surfaces that rub against each other in the engine.

Atoms not only have the property of separating (wear and tear) but also the ability to form new connections with each other (reconstruction).

Only the conditions (temperature and pressure) have to be right.

Above a certain value, the formation of the layer stops (self-regulating) by itself.

This layer also cannot flake off or the particles that lead to the formation of the metal-ceramic layer cannot clog anything.


The metal-ceramic coating formed by Revitalizant protects the engine parts even after the oil change.

 

Overview of the additive package:

revitalized 

Restores worn surfaces by forming a metal-ceramic layer in areas in the engine where friction causes high pressure and temperatures.

2D GLEITAGENT

Reduces friction losses to an absolute minimum.

METAL CONDITIONS

Protects the engine against the breakage of the oil film and thus prevents additional wear.


Benefits of revitalizing with 1 stage maximum:

  • Restores the surfaces of engine parts and compensates for wear and tear.
  • Engine compression recovery.
  • Forms active protection against overload and overheating.
  • Improves the lubricating properties of engine oil and the tribological parameters of engine parts.
  • Lowers fuel & oil consumption
  • Increases engine performance and improves driving dynamics.

 

Oil consumption Causes where this product helps:

  • Piston oil scraper rings worn
  • Worn cylinder surfaces

Innovative 3-component* product of the latest nano generation.

Combines the advantages of the two-phase metal conditioner with those of the revitalizant.

The advantage of metal conditioner with Revitalizant is the after-effect: the metal-ceramic coating formed by Revitalizant protects the engine parts even after the oil change.

Detailed specifications

use

  • Restores the surfaces of the engine parts and compensates for the wear that has occurred.
  • Engine compression recovery.
  • Forms active protection against overload and overheating.
  • Improves the lubricating properties of engine oil and the tribological parameters of engine parts.
  • Reduces fuel consumption.
  • Increases engine performance and improves driving dynamics.
  • Increases engine smoothness.
  • Extends engine life.
  • Effectively protects the engine against wear.

Attention! Not intended for use in internal combustion engines with a special hardening coating on the cylinders (ALUSIL, LOKASIL, NIKASIL, GALNIKAL) because the material required to form a stable metal-ceramic layer is missing.

characteristics

The metal conditioner with revitalizant is suitable for all petrol, diesel and gas engines (LPG). It is used in passenger cars and vans with an oil system volume of 3 to 5 liters.
  • RF=100
  • RF (Revitalization Factor) – efficiency coefficient of restoration and protection against wear.
  • RF=100 means that the engine has completed the complete revitalization cycle as a result of using the product.

Instructions for use

  • Shake the bottle.
  • Pour the contents into the oil filler neck of the engine brought up to operating temperature.
  • Start the engine and let it idle for approx. Let run 3-5 minutes.

dosage

1 bottle of the atomic metal conditioner Maximum (225 ml) for 3…5 L oil; 2 bottles – for 5…10 L oil; 3 – for 10…15 L oil etc.

annotation

  • Metal conditioner with Revitlizant is for petrol, gas (LPG) and diesel engines of passenger cars and small trucks with a volume
  • Compatible with all types of motor oils
  • revitalization runs during the1000-1500 km mileage; Oil change is not recommended during this period.
  • Reapplication of XADO Maximum 1 Stage is recommended after 100 000 km mileage.
  • To maintain the highest level of engine protection, use XADO Atomic Oil or XADO HighWay Metal Conditioner engine oil with every oil change.

Metal conditioner is added once to the engine oil, starting from 1 bottle (225 ml) to 4-6 liters of engine oil.

Technology and Certificates

3C
The 3-component additive package enables worn parts to be rebuilt and at the same time protects against future wear. The revitalizant forms a new surface coating, restoring worn work surfaces and compensating for current wear. The metal conditioner strengthens the sliding film and harmonises perfectly with the revitalizant. In addition, the 2D sliding agent ensures ultra-light gliding between the engine parts.

3G

The 3. Generation of the Revitalizant is characterized by an optimized number of activated and revitalizing nanoparticles, which form the basis of the surface coating with protective properties and regenerative ability.

PROTECTION FOR 100,000KM

The wear protection is active for 100,000 km. After that, re-treatment is recommended.

packaging

Bottle in a cardboard box 225 ml, item number: XA 43212

 

    Find products by problem solving